Defra Approved Back Boiler Stoves Explained In Fewer Than 140 Characters

· 6 min read
Defra Approved Back Boiler Stoves Explained In Fewer Than 140 Characters

Defra Approved Back Boiler Stoves

There are a myriad of things to consider when choosing a new stove. The attraction of dual-functionality is just one of the many aspects to take into consideration.

DEFRA approved back boiler stoves are an ideal solution to these issues. This is due to the fact that they use the smallest amount of combustion air, meaning very little smoke.

Clean Burn Technology

A defra-approved back boiler stove is an excellent choice for those who want an efficient and clean burning stove that can heat your home and provide hot water to your radiators. These stoves are equipped with an integrated steel boiler capable of heating the central heating system while the fire is burning inside the stove. This makes it an efficient way to utilize wood burners.



The majority of our defra-approved back boiler stoves feature a pre-heated airwash system that assists in keeping the glass doors clear of ash and soot deposits. The secondary combustion system re-burns any unburnt particles created during the initial combustion. This helps keep the flue gas clear, which results in more efficient burning process and lower cost of fuel.

Some of our stoves have been independently tested and certified as Defra SE (Smoke Exempt).  www.fireplacesandstove.com  accomplish this by having a top air vent adjustment that stops you from closing it all the way that would shut off oxygen flow to the flame. This causes the fire to smoke instead of burning cleanly and release more pollutants into the atmosphere.

Another crucial aspect is the moisture content of your fuel. This can be a major contributor to the amount of smoke emitted by a stove. We recommend burning only dried, seasoned wood with a minimum moisture content of 20 percent to ensure your stove burns as efficiently and effectively as possible. The majority of our approved Defra stoves have a built-in moisture sensor which will alter the rate of combustion when burning wet wood.

Some manufacturers have even gone one step further to enhance the efficiency of their stoves by including an advanced clean burn system that is controlled by the chrome pull lever located at the base of the stove. It opens and closes a vent that draws air over the fire reburning the initial smoke produced in the initial process of burning. Our Defra SE approved ranges are now even more efficient. You can save money on your energy costs.

Easy to Clean

A back boiler stove that is defra-approved allows you to run your central heating and hot water off the same system. This is accomplished by connecting a loop from the other tappings on the back boiler (there typically are two) to your hot water tank then using thermosyphoning to get the warmth into the home. This means that your boiler will never run out of hot water, as it will be supplied by the tank.

Clean your stove on a regular basis to ensure its performance is at its best. Start by ensuring that the stove is cold to the touch, then wipe down the main body of the stove and the door with a clean, dry cloth. We recommend using a microfiber towel, because they are less rough than cotton ones.

After wiping down the inside of your stove it is a good idea to wash the glass. Glass cleaners can be found at most hardware stores and will help remove stubborn marks and stains. It is recommended to use the glass cleaner sparingly because too much could cause damage to the surface of the glass.

As time passes the seals that cover the glass and doors of your stove will begin to wear down. It is essential to replace the seals every year to avoid gaps that could allow heat to escape. Based on the model you select it is possible to do this quickly and easily with stove rope that is available from the majority of hardware stores.

If you own an Eco Design 2022-compliant back burner on a defra-approved stove the combustion process will be more efficient than with traditional wood burning stoves. The most recent technologies have allowed for a reduction in the amount of combustibles that are released into the air. Compliant stoves are more environmentally efficient and are also less expensive to operate.

A back boiler stove is always more expensive than a regular multifuel stove due to the fact that it produces more hot water. It is still an economical way to heat your house and can be used for both central heating as well as hot-water.

Easy to Install

Boiler stoves are stylish and efficient option that can provide hot water and heat for your central heating system. A wood burner with back boiler is distinct from other multi-fuel stoves that need to be connected to gas boilers. It can be connected directly to hot water and central heating of your home, eliminating the necessity for a second heating system.

A wood burning stove with a back boiler can also be used to power your heating system entirely using renewable energy sources, making them a more eco-friendly choice than other stoves. In addition, because they burn wood and pellets produce less emissions than gas or oil heating systems, which makes them a great option for those concerned about the impact their energy use has on global warming.

Installing a wood-burning fireplace with an electric boiler is relatively simple. It is crucial to ensure that the stove is correctly installed and connected to your heating system. Therefore, it is best to have the installation done by a certified heating engineer. They can verify that your stove is installed correctly and is connected to the appropriate systems. They can also check that all safety devices are installed.

Defra Approved stoves, or Defra Exempt Stoves as they are sometimes referred to, have passed the Department of Environment, Food and Rural Affairs (DEFRA) requirements for smoke emission levels. They can be used in Smoke Control Areas and have been tested and modified to ensure that they have a clean and efficient combustion which can be used with both wood and smokeless fuels.

As as such, DEFRA approved stoves, such as the Defra Exempt Dunsley Yorkshire and our most popular Hi-Flame Aidan can provide an extremely efficient combustion process with very low harmful emissions. They have been tested in accordance with the new Eco Design regulations that restrict the amount of particulate matter as well as NOx, CO2 and organic gases the stove produces during its normal operation.

Ideal for Smoke Control Areas

Most UK cities and towns are classified as Smoke Control Areas and burning logs on older stoves or open flames can lead to a fine for creating nuisance smoke emissions. If you decide to choose the right appliance for your home, Defra-approved back boiler stoves are not subject to these restrictions.

Defra exempt wood burners are engineered to utilize Clean Burn technology which ensures that any fuel burned efficiently and with minimal smoke production. This means that you can enjoy a beautiful fireplace when you live in a smoke-free area however, you'll have to limit your logs to approved smokeless mineral fuels.

The stoves are compliant with Defra standards because they have airtight chambers that are precisely controlled for airflow. They also have triple airflow systems that ensure that combustion byproducts are burned up before they reach the chimney. This is not just to stop any smoke from causing nuisance, but it also minimises the buildup of soot that can hinder the flue's flow and reduce gas efficiency.

It is crucial to buy a Defra-approved, Defra-certified stove from an Expert Local retailer that can ensure that the right size stove is chosen for your home to ensure maximum heating efficiency and ensure it is installed correctly by a registered HETAS installer. They can also help in selecting the most suitable chimney liner to ensure a safe and efficient installation. They will also help you decide if your home needs any additional ventilation.

Modern DEFRA approved stoves are far superior to traditional wood burners or open fires. They offer a minimum 75 percent efficiency, which will not only lower your environmental impact but also saves you money. In addition to this Defra approved stoves can be used in a smoke controlled space and require a minimum of 6mm stainless steel twin wall flexible chimney liner, which is less expensive than the larger 12mm liners needed for Ecodesign stoves.

If you are in any doubt about whether your property is in a smoke-free area, check with your local council who will be able to give you the most current information. Most reputable stove makers have a Defra-exempt category in their range to help you to identify these appliances.